Digital Signage And Defending Projectors Outside

Digital Signage And Defending Projectors Outside

Digital advertising is a sort of digital advertising using totally different mediums, similar to AV shows and projectors. These show the information, ads and other data. Commonly present in each public and private locations from corporate buildings to retail outlets.

Digital signage and projector protection

Properly we've all seen the digital advertising posters that are used indoors, being deployed outdoors in protective, out of doors housings. These housings provide all of the important safety from the weather - no matter if it is raining, snowing or sunny. A first-rate instance was the 2012 London Olympics when 9 out of doors digital signage kiosks had been provided to the primary sponsor of the Olympics.

Earlier than the Olympics in 2012 was the Queen's Diamond Jubilee Live performance that had Buckingham Palace light up with 36, 20,000 lumen projectors from Barco and it is partner.

So as you'll be able to see from this example, technology has moved on!

Now with 4K projectors being used for digital signage, they carry a large investment of up to $10K, as for the 7000 lumens NEC range. So when these are deployed in places comparable to train stations and used as points of knowledge they must be protected, to ensure the hardware does not get broken and to ensure the ad campaign is a success.

outdoor projector enclosures projector enclosure

As you can perceive, you may have a really costly piece of hardware, you will wish to protect the funding, among the best options is to place the hardware in a protecting housing, having been designed and manufactured by a longtime enclosure manufacture who's projector housings are manufactured from steel, welded for maximum power after which powder coated to offer a resilient outer coating.

The protective, projector enclosures come full with a dual cooling system that may take away the air each 7 seconds throughout the protecting housing, the outside, projector housing is also fitted with thermostatic heating unit for when the projector just isn't working within the small hours and to keep condensation from the hardware.

The protecting projector housing is secured with 2 high security locks and the viewing window is 6mm thick, insulation might be fitted to the internal walls if required.

One of the distinctive points of the protective, projector housing is that you simply do not need to open the housing to replace the content material, this can be executed, both remotely or through a weatherproof USB port on the projector enclosure.

The current range of protecting projector enclosures are available for projectors as much as 10,000 lumens, other projectors sizes are available as customized units.

© 2013,SOVERTEK. Все Права Защищены.